Features
- Adjust: The loft with Flight Control Technology (FCT), The face angle with the new Adjustable Sole Plate (ASP), The CG location with Movable Weight Technology (MWT®).
- Promotes up to 100 yards of side-to-side trajectory change and ±1,000 RPM backspin change.
- New aerodynamic shape promotes faster speed for more distance.
- White non-glare crown and black clubface for easy alignment.
Product Description
R11 Driver - ONLY R11 can activate the THREE DIMENSIONS to DISTANCE: loft, face angle, and flight path.
Features
- Movable Weight Technology (MWT) allows golfers to adjust the weights in the heel and toe to help promote a draw or a fade
- Flight Control Technology (FCT) allows the player to easily adjust the loft
- Adjustable Sole Plate (ASP) Technology allows golfers to adjust the face to one of five angles independent of loft setting
- White crown and black face makes alignment easy
- Includes matching headcover and wrench
Product Description
Faster, longer, and more tunable than ever - this is what the R11S has to offer. Flight Control Technology (FCT) has been further enhanced by enabling loft adjustments up to 1.5 degrees, while the center of gravity toward the heel or toe may also be adjusted utilizing Movable Weight Technology (MWT). With a maximum sized titanium clubhead (460cc) and a Thick-Thin Crown design, the R11S lowers the Center of Gravity (CG) for increased swing speed and longer distances off the tee. Inverted Cone Technology (ICT) promotes more ball speed on off-center hits - making it a very forgiving driver. Aesthetically, the white crown and black face combination makes alignment easy and eliminates any glare on top of the clubhead. If these enhancements weren't enough, the R11S also features a lightweight Aldila RIP Phenom shaft and TaylorMade's own performance lightweight TM 360 grip.
Features:
Features
- Long shaft, lighter weight and new low-drag aerodynamics promote faster swing speed for more distance
- Bigger, deeper clubface works with low CG to promote higher launch/lower spin for increased distance
- New head shape and Inverted Cone face technology create the largest sweetspot of any TaylorMade® driver
- White non-glare crown and black clubface makes alignment easy
- Includes matching headcover
Product Description
Burner Superfast 2.0...No Speed Too Extreme! TaylorMade's SuperFast 2.0 Driver is sure to raise your golf game to the highest level. With bold aesthetics and an aerodynamic shape, this extremely lightweight driver features innovative technology that helps deliver extreme distance. TaylorMade Mens Burner Superfast 2.0 Drivers feature: Lofts: 9.5 10.5 HT(13*) Graphite shaft available in Senior, Regular or Stiff flex Available in left- and right-hand Includes headcover The Best Performance Golf Brand In The World!
Features
- A full 14 grams lighter than the Burner 2009 Driver to promote faster clubhead speed and monstrous distance
- Super light 30-gram WINN grip that doesn¿t sacrifice feel or traction.
- Aerodynamic head shape reduces drag
- Bigger expansive clubface is easier to hit and builds confidence
- Matrix Ozik XCON shaft promotes higher launch and more ball speed for more distance
Product Description
Burner Superfast Driver TaylorMade Mens Burner Superfast Drivers feature: Lofts: 9.5 10.5 13HT (RH only) Graphite shaft available in Senior, Regular, Stiff or X-Stiff flex 13HT not available in X-Stiff flex 9.5 not available in Senior flex Available in left- and right-hand Includes headcover Burner Superfast Driver...Distance Comes From Speed!
Product Description
R11 S TP Driver - Faster, Longer and More Turnable Than Ever Adjust the loft up or down (±1.5¿) with Flight Control Technology (FCT) Adjust the face to one of five angels (±3¿) with Adjustable Sole Plate (ASP) Technology Adjust the center of gravity toward the heel or toe with Movable Weight Technology (MWT) Maximum-sized 460cc titanium head with Thick-Thin Crown design for lower CG Inverted Cone Technology (ICT) promotes more ball speed on off-center hits White crown and black face makes alignment easy and eliminates glare on top
Features
- TaylorMade R11S
- Dexterity: Right-Handed
- Shaft Brand: Aldila RIP Phenom 60
- Shaft Material: Graphite
- Shaft Flex: Stiff
Product Description
Brand new for 2012, the TaylorMade R11S has been the most anticipated driver on the market. This popular choice features an adjustable sole plate which allows you to open or close the face by 3 degrees. Loft adjustments are made using TaylorMade's exclusive Flight Control Technology, which allows golfers to increase or decrease loft by a degree and a half. The R11S driver also features a white crown for easy alignment and Movable Weight Technology. It comes with a stock Aldila RIP Phenom 60 graphite shaft. Headcover, wrench, and TaylorMade fitting manual are all included. Additional weights not included. This club is brand new, guaranteed 100% authentic, and offers you tremendous distance and control.
Features
- ?Replaces adjustable sleeve on right handed TaylorMade R9 and R11 models
- ?Fits 0.335" shafts only
- ?Makes the same adjustments as the original sleeve
Product Description
TaylorMade R11 .335 Adapter Sleeve
Features
- TaylorMade R11S TP
- Dexterity: Right-Handed
- Shaft Brand: Aldila RIP Phenom 65 TP
- Shaft Material: Graphite
- Shaft Flex: Stiff
Product Description
Brand new for 2012, the TaylorMade R11S has been the most anticipated driver on the market. This popular choice features an adjustable sole plate which allows you to open or close the face by 3 degrees. Loft adjustments are made using TaylorMade's exclusive Flight Control Technology, which allows golfers to increase or decrease loft by a degree and a half. The R11S driver also features a white crown for easy alignment and Movable Weight Technology. It comes with an upgraded Aldila RIP Phenom 65 TP graphite shaft. Please note that the TP and non-TP R11S heads are identical. The only difference between TP and non-TP models is the shaft. Headcover, wrench, and TaylorMade fitting manual are all included. Additional weights not included. This club is brand new, guaranteed 100% authentic, and offers you tremendous distance and control.
Product Description
Headcover Specifications:
- COMPANY / BRAND: Taylor Made
- CLUB TYPE: Driver
- MODEL: R11S
- COLOR: White/Black/Red
- CONDITION: New
- CONDITION SPECIFICS: New condition 10, sweet R11S driver cover!! NO TOOL INCLUDED!!
Features
- Measures 9"x2.2"
- Can put on almost any surface
- Vinyl Color: WHITE
- Instructions included
- Easy to apply and remove
Product Description
This is for a "I'd rather be driving a Taylormade" decal. Great for cars/trucks. High quality avery vinyl (outdoor life of 6years, indoor of 10+years).
TaylorMade R11 S Driver The TaylorMade R11 S Driver is faster, longer and more tunable than ever. This is acheived by adjusting the loft up or down (+/-1.5 deg) with Flight Control Technology (FCT) and adjusting the face to one of five angles (+/-3 deg) with Adjustable Sole Plate (ASP) Technology. Movable Weight Technology allows the center of gravity to be moved toward the heel or toe and a maximum-sized 460cc titanium head with Thick-Thin Crown design lowers that center of gravity. Inverted Cone Technology (ICT) promotes more ball speed on off-center hits and the white crown and black face makes alignment easy and eliminates glare on top. .
TaylorMade R11 TP S Driver The TaylorMade R11 S TP Driver is faster, longer and more tunable than ever. This is acheived by adjusting the loft up or down (+/-1.5 deg) with Flight Control Technology (FCT) and adjusting the face to one of five angles (+/-3 deg) with Adjustable Sole Plate (ASP) Technology. Movable Weight Technology allows the center of gravity to be moved toward the heel or toe and a maximum-sized 460cc titanium head with Thick-Thin Crown design lowers that center of gravity. Inverted Cone Technology (ICT) promotes more ball speed on off-center hits and the white crown and black face makes alignment easy and eliminates glare on top. .
TaylorMade Lady R11 S Driver The TaylorMade Lady R11 S Driver is faster, longer and more tunable than ever. This is acheived by adjusting the loft up or down (+/-1.5 deg) with Flight Control Technology (FCT) and adjusting the face to one of five angles (+/-3 deg) with Adjustable Sole Plate (ASP) Technology. Movable Weight Technology allows the center of gravity to be moved toward the heel or toe and a maximum-sized 460cc titanium head with Thick-Thin Crown design lowers that center of gravity. Inverted Cone Technology (ICT) promotes more ball speed on off-center hits and the white crown and black face makes alignment easy and eliminates glare on top. .
Adjust the face angle with new Adjustable Sole Plate Technology (ASP). Adjust the loft with Flight Control Technology (FCT). Adjust the CG location with Movable Weight Technology.
TaylorMade R11 Iron Set - 4-PW with Steel Shafts Inspired by R11 driver innovation, the new TaylorMade R11 Iron is tuned to perfection. Precision center-of-gravity (CG) placements, ultra-thin faces, a Tour sole design, and Inverted Cone Technology make R11 the most powerful, playable, and refined iron ever. With a weight port permanently positioned in the center of the back of an iron head during assembly, the Precision Weighting Port assures that each R11 iron in the set is of uniform swingweight while also ensuring that the CG location is precisely and optimally positioned in the center of the face between the toe and heel. In the past, clubmakers have installed cartridges of varying weight in the hosel to adjust swingweight, and by doing so have pulled the CG closer to the heel to varying degrees, resulting in a set of irons consistent in swingweight but inconsistent in CG location. The Inverted Cone Technology inside the R11 Irons promotes faster ball speed and distance on off-center hits, and the ultra-thin face thickness also promotes faster ball speed and distance in the R11 long- and middle-irons. The R11 irons Multi-Functional Sole is beveled at the back to make it perform like a much thinner sole, which increases playability from a variety of lies. Yet it also features a low and deeper center of gravity that makes it easy to launch the ball on a powerful and penetrating flight. Additional features: Ultra-thin face thickness promotes faster ball speed and distance Inverted Cone Technology promotes faster ball speed and distance on off-center hits Multi-functional sole increases playability from a variety of lies Progressive topline thickness promotes confidence at address throughout the set Progressive offset Advanced groove design promotes increased spin and control Iron construction: Cast Shaft type: KBS Tour 90
TaylorMade Individual R11 Iron with Steel Shaft Inspired by R11 driver innovation, the new TaylorMade R11 Iron is tuned to perfection. Precision center-of-gravity (CG) placements, ultra-thin faces, a Tour sole design, and Inverted Cone Technology make R11 the most powerful, playable, and refined iron ever. With a weight port permanently positioned in the center of the back of an iron head during assembly, the Precision Weighting Port assures that each R11 iron in the set is of uniform swingweight while also ensuring that the CG location is precisely and optimally positioned in the center of the face between the toe and heel. In the past, clubmakers have installed cartridges of varying weight in the hosel to adjust swingweight, and by doing so have pulled the CG closer to the heel to varying degrees, resulting in a set of irons consistent in swingweight but inconsistent in CG location. The Inverted Cone Technology inside the R11 Irons promotes faster ball speed and distance on off-center hits, and the ultra-thin face thickness also promotes faster ball speed and distance in the R11 long- and middle-irons. The R11 irons Multi-Functional Sole is beveled at the back to make it perform like a much thinner sole, which increases playability from a variety of lies. Yet it also features a low and deeper center of gravity that makes it easy to launch the ball on a powerful and penetrating flight. Additional features: Ultra-thin face thickness promotes faster ball speed and distance Inverted Cone Technology promotes faster ball speed and distance on off-center hits Multi-functional sole increases playability from a variety of lies Progressive topline thickness promotes confidence at address throughout the set Progressive offset Advanced groove design promotes increased spin and control Iron construction: Cast Shaft type: KBS Tour 90
TaylorMade R11 Iron Set - 3-PW with Graphite Shafts Inspired by R11 driver innovation, the new TaylorMade R11 Iron is tuned to perfection. Precision center-of-gravity (CG) placements, ultra-thin faces, a Tour sole design, and Inverted Cone Technology make R11 the most powerful, playable, and refined iron ever. With a weight port permanently positioned in the center of the back of an iron head during assembly, the Precision Weighting Port assures that each R11 iron in the set is of uniform swingweight while also ensuring that the CG location is precisely and optimally positioned in the center of the face between the toe and heel. In the past, clubmakers have installed cartridges of varying weight in the hosel to adjust swingweight, and by doing so have pulled the CG closer to the heel to varying degrees, resulting in a set of irons consistent in swingweight but inconsistent in CG location. The Inverted Cone Technology inside the R11 Irons promotes faster ball speed and distance on off-center hits, and the ultra-thin face thickness also promotes faster ball speed and distance in the R11 long- and middle-irons. The R11 irons Multi-Functional Sole is beveled at the back to make it perform like a much thinner sole, which increases playability from a variety of lies. Yet it also features a low and deeper center of gravity that makes it easy to launch the ball on a powerful and penetrating flight. Additional features: Ultra-thin face thickness promotes faster ball speed and distance Inverted Cone Technology promotes faster ball speed and distance on off-center hits Multi-functional sole increases playability from a variety of lies Progressive topline thickness promotes confidence at address throughout the set Progressive offset Advanced groove design promotes increased spin and control Iron construction: Cast Shaft types: Motore F1 65, Motore F1 75
TaylorMade R11 Iron Set - 5-PW with Steel Shafts Inspired by R11 driver innovation, the new TaylorMade R11 Iron is tuned to perfection. Precision center-of-gravity (CG) placements, ultra-thin faces, a Tour sole design, and Inverted Cone Technology make R11 the most powerful, playable, and refined iron ever. With a weight port permanently positioned in the center of the back of an iron head during assembly, the Precision Weighting Port assures that each R11 iron in the set is of uniform swingweight while also ensuring that the CG location is precisely and optimally positioned in the center of the face between the toe and heel. In the past, clubmakers have installed cartridges of varying weight in the hosel to adjust swingweight, and by doing so have pulled the CG closer to the heel to varying degrees, resulting in a set of irons consistent in swingweight but inconsistent in CG location. The Inverted Cone Technology inside the R11 Irons promotes faster ball speed and distance on off-center hits, and the ultra-thin face thickness also promotes faster ball speed and distance in the R11 long- and middle-irons. The R11 irons Multi-Functional Sole is beveled at the back to make it perform like a much thinner sole, which increases playability from a variety of lies. Yet it also features a low and deeper center of gravity that makes it easy to launch the ball on a powerful and penetrating flight. Additional features: Ultra-thin face thickness promotes faster ball speed and distance Inverted Cone Technology promotes faster ball speed and distance on off-center hits Multi-functional sole increases playability from a variety of lies Progressive topline thickness promotes confidence at address throughout the set Progressive offset Advanced groove design promotes increased spin and control Iron construction: Cast Shaft type: KBS Tour 90
TaylorMade R11 Individual Iron with Graphite Shaft Inspired by R11 driver innovation, the new TaylorMade R11 Iron is tuned to perfection. Precision center-of-gravity (CG) placements, ultra-thin faces, a Tour sole design, and Inverted Cone Technology make R11 the most powerful, playable, and refined iron ever. With a weight port permanently positioned in the center of the back of an iron head during assembly, the Precision Weighting Port assures that each R11 iron in the set is of uniform swingweight while also ensuring that the CG location is precisely and optimally positioned in the center of the face between the toe and heel. In the past, clubmakers have installed cartridges of varying weight in the hosel to adjust swingweight, and by doing so have pulled the CG closer to the heel to varying degrees, resulting in a set of irons consistent in swingweight but inconsistent in CG location. The Inverted Cone Technology inside the R11 Irons promotes faster ball speed and distance on off-center hits, and the ultra-thin face thickness also promotes faster ball speed and distance in the R11 long- and middle-irons. The R11 irons Multi-Functional Sole is beveled at the back to make it perform like a much thinner sole, which increases playability from a variety of lies. Yet it also features a low and deeper center of gravity that makes it easy to launch the ball on a powerful and penetrating flight. Additional features: Ultra-thin face thickness promotes faster ball speed and distance Inverted Cone Technology promotes faster ball speed and distance on off-center hits Multi-functional sole increases playability from a variety of lies Progressive topline thickness promotes confidence at address throughout the set Progressive offset Advanced groove design promotes increased spin and control Iron construction: Cast Shaft types: Motore F1 65, Motore F1 55, Motore F1 75
TaylorMade R11 Iron Set - 3-PW with Steel Shafts Inspired by R11 driver innovation, the new TaylorMade R11 Iron is tuned to perfection. Precision center-of-gravity (CG) placements, ultra-thin faces, a Tour sole design, and Inverted Cone Technology make R11 the most powerful, playable, and refined iron ever. With a weight port permanently positioned in the center of the back of an iron head during assembly, the Precision Weighting Port assures that each R11 iron in the set is of uniform swingweight while also ensuring that the CG location is precisely and optimally positioned in the center of the face between the toe and heel. In the past, clubmakers have installed cartridges of varying weight in the hosel to adjust swingweight, and by doing so have pulled the CG closer to the heel to varying degrees, resulting in a set of irons consistent in swingweight but inconsistent in CG location. The Inverted Cone Technology inside the R11 Irons promotes faster ball speed and distance on off-center hits, and the ultra-thin face thickness also promotes faster ball speed and distance in the R11 long- and middle-irons. The R11 irons Multi-Functional Sole is beveled at the back to make it perform like a much thinner sole, which increases playability from a variety of lies. Yet it also features a low and deeper center of gravity that makes it easy to launch the ball on a powerful and penetrating flight. Additional features: Ultra-thin face thickness promotes faster ball speed and distance Inverted Cone Technology promotes faster ball speed and distance on off-center hits Multi-functional sole increases playability from a variety of lies Progressive topline thickness promotes confidence at address throughout the set Progressive offset Advanced groove design promotes increased spin and control Iron construction: Cast Shaft type: KBS Tour 90
TaylorMade R11 Iron Set - 4-PW with Graphite Shafts Inspired by R11 driver innovation, the new TaylorMade R11 Iron is tuned to perfection. Precision center-of-gravity (CG) placements, ultra-thin faces, a Tour sole design, and Inverted Cone Technology make R11 the most powerful, playable, and refined iron ever. With a weight port permanently positioned in the center of the back of an iron head during assembly, the Precision Weighting Port assures that each R11 iron in the set is of uniform swingweight while also ensuring that the CG location is precisely and optimally positioned in the center of the face between the toe and heel. In the past, clubmakers have installed cartridges of varying weight in the hosel to adjust swingweight, and by doing so have pulled the CG closer to the heel to varying degrees, resulting in a set of irons consistent in swingweight but inconsistent in CG location. The Inverted Cone Technology inside the R11 Irons promotes faster ball speed and distance on off-center hits, and the ultra-thin face thickness also promotes faster ball speed and distance in the R11 long- and middle-irons. The R11 irons Multi-Functional Sole is beveled at the back to make it perform like a much thinner sole, which increases playability from a variety of lies. Yet it also features a low and deeper center of gravity that makes it easy to launch the ball on a powerful and penetrating flight. Additional features: Ultra-thin face thickness promotes faster ball speed and distance Inverted Cone Technology promotes faster ball speed and distance on off-center hits Multi-functional sole increases playability from a variety of lies Progressive topline thickness promotes confidence at address throughout the set Progressive offset Advanced groove design promotes increased spin and control Iron construction: Cast Shaft types: Motore F1 55, Motore F1 65, Motore F1 75
TaylorMade R11 Iron Set - 4-PW, GW with Steel Shafts Inspired by R11 driver innovation, the new TaylorMade R11 Iron is tuned to perfection. Precision center-of-gravity (CG) placements, ultra-thin faces, a Tour sole design, and Inverted Cone Technology make R11 the most powerful, playable, and refined iron ever. With a weight port permanently positioned in the center of the back of an iron head during assembly, the Precision Weighting Port assures that each R11 iron in the set is of uniform swingweight while also ensuring that the CG location is precisely and optimally positioned in the center of the face between the toe and heel. In the past, clubmakers have installed cartridges of varying weight in the hosel to adjust swingweight, and by doing so have pulled the CG closer to the heel to varying degrees, resulting in a set of irons consistent in swingweight but inconsistent in CG location. The Inverted Cone Technology inside the R11 Irons promotes faster ball speed and distance on off-center hits, and the ultra-thin face thickness also promotes faster ball speed and distance in the R11 long- and middle-irons. The R11 irons Multi-Functional Sole is beveled at the back to make it perform like a much thinner sole, which increases playability from a variety of lies. Yet it also features a low and deeper center of gravity that makes it easy to launch the ball on a powerful and penetrating flight. Additional features: Ultra-thin face thickness promotes faster ball speed and distance Inverted Cone Technology promotes faster ball speed and distance on off-center hits Multi-functional sole increases playability from a variety of lies Progressive topline thickness promotes confidence at address throughout the set Progressive offset Advanced groove design promotes increased spin and control Iron construction: Cast Shaft type: KBS Tour 90
TaylorMade R11 Iron Set - 4-PW, GW with Graphite Shafts Inspired by R11 driver innovation, the new TaylorMade R11 Iron is tuned to perfection. Precision center-of-gravity (CG) placements, ultra-thin faces, a Tour sole design, and Inverted Cone Technology make R11 the most powerful, playable, and refined iron ever. With a weight port permanently positioned in the center of the back of an iron head during assembly, the Precision Weighting Port assures that each R11 iron in the set is of uniform swingweight while also ensuring that the CG location is precisely and optimally positioned in the center of the face between the toe and heel. In the past, clubmakers have installed cartridges of varying weight in the hosel to adjust swingweight, and by doing so have pulled the CG closer to the heel to varying degrees, resulting in a set of irons consistent in swingweight but inconsistent in CG location. The Inverted Cone Technology inside the R11 Irons promotes faster ball speed and distance on off-center hits, and the ultra-thin face thickness also promotes faster ball speed and distance in the R11 long- and middle-irons. The R11 irons Multi-Functional Sole is beveled at the back to make it perform like a much thinner sole, which increases playability from a variety of lies. Yet it also features a low and deeper center of gravity that makes it easy to launch the ball on a powerful and penetrating flight. Additional features: Ultra-thin face thickness promotes faster ball speed and distance Inverted Cone Technology promotes faster ball speed and distance on off-center hits Multi-functional sole increases playability from a variety of lies Progressive topline thickness promotes confidence at address throughout the set Progressive offset Advanced groove design promotes increased spin and control Iron construction: Cast Shaft types: Motore F1 55, Motore F1 65, Motore F1 75
TaylorMade R11 Iron Set - 5-PW, SW with Graphite Shafts Inspired by R11 driver innovation, the new TaylorMade R11 Iron is tuned to perfection. Precision center-of-gravity (CG) placements, ultra-thin faces, a Tour sole design, and Inverted Cone Technology make R11 the most powerful, playable, and refined iron ever. With a weight port permanently positioned in the center of the back of an iron head during assembly, the Precision Weighting Port assures that each R11 iron in the set is of uniform swingweight while also ensuring that the CG location is precisely and optimally positioned in the center of the face between the toe and heel. In the past, clubmakers have installed cartridges of varying weight in the hosel to adjust swingweight, and by doing so have pulled the CG closer to the heel to varying degrees, resulting in a set of irons consistent in swingweight but inconsistent in CG location. The Inverted Cone Technology inside the R11 Irons promotes faster ball speed and distance on off-center hits, and the ultra-thin face thickness also promotes faster ball speed and distance in the R11 long- and middle-irons. The R11 irons Multi-Functional Sole is beveled at the back to make it perform like a much thinner sole, which increases playability from a variety of lies. Yet it also features a low and deeper center of gravity that makes it easy to launch the ball on a powerful and penetrating flight. Additional features: Ultra-thin face thickness promotes faster ball speed and distance Inverted Cone Technology promotes faster ball speed and distance on off-center hits Multi-functional sole increases playability from a variety of lies Progressive topline thickness promotes confidence at address throughout the set Progressive offset Advanced groove design promotes increased spin and control Iron construction: Cast Shaft types: Motore F1 55, Motore F1 65, Motore F1 75
TaylorMade R11 Iron Set - 5-PW, GW with Steel Shafts Inspired by R11 driver innovation, the new TaylorMade R11 Iron is tuned to perfection. Precision center-of-gravity (CG) placements, ultra-thin faces, a Tour sole design, and Inverted Cone Technology make R11 the most powerful, playable, and refined iron ever. With a weight port permanently positioned in the center of the back of an iron head during assembly, the Precision Weighting Port assures that each R11 iron in the set is of uniform swingweight while also ensuring that the CG location is precisely and optimally positioned in the center of the face between the toe and heel. In the past, clubmakers have installed cartridges of varying weight in the hosel to adjust swingweight, and by doing so have pulled the CG closer to the heel to varying degrees, resulting in a set of irons consistent in swingweight but inconsistent in CG location. The Inverted Cone Technology inside the R11 Irons promotes faster ball speed and distance on off-center hits, and the ultra-thin face thickness also promotes faster ball speed and distance in the R11 long- and middle-irons. The R11 irons Multi-Functional Sole is beveled at the back to make it perform like a much thinner sole, which increases playability from a variety of lies. Yet it also features a low and deeper center of gravity that makes it easy to launch the ball on a powerful and penetrating flight. Additional features: Ultra-thin face thickness promotes faster ball speed and distance Inverted Cone Technology promotes faster ball speed and distance on off-center hits Multi-functional sole increases playability from a variety of lies Progressive topline thickness promotes confidence at address throughout the set Progressive offset Advanced groove design promotes increased spin and control Iron construction: Cast Shaft type: KBS Tour 90
TaylorMade R11 Iron Set - 5-PW, SW with Steel Shafts Inspired by R11 driver innovation, the new TaylorMade R11 Iron is tuned to perfection. Precision center-of-gravity (CG) placements, ultra-thin faces, a Tour sole design, and Inverted Cone Technology make R11 the most powerful, playable, and refined iron ever. With a weight port permanently positioned in the center of the back of an iron head during assembly, the Precision Weighting Port assures that each R11 iron in the set is of uniform swingweight while also ensuring that the CG location is precisely and optimally positioned in the center of the face between the toe and heel. In the past, clubmakers have installed cartridges of varying weight in the hosel to adjust swingweight, and by doing so have pulled the CG closer to the heel to varying degrees, resulting in a set of irons consistent in swingweight but inconsistent in CG location. The Inverted Cone Technology inside the R11 Irons promotes faster ball speed and distance on off-center hits, and the ultra-thin face thickness also promotes faster ball speed and distance in the R11 long- and middle-irons. The R11 irons Multi-Functional Sole is beveled at the back to make it perform like a much thinner sole, which increases playability from a variety of lies. Yet it also features a low and deeper center of gravity that makes it easy to launch the ball on a powerful and penetrating flight. Additional features: Ultra-thin face thickness promotes faster ball speed and distance Inverted Cone Technology promotes faster ball speed and distance on off-center hits Multi-functional sole increases playability from a variety of lies Progressive topline thickness promotes confidence at address throughout the set Progressive offset Advanced groove design promotes increased spin and control Iron construction: Cast Shaft type: KBS Tour 90
TaylorMade R11 Iron Set - 5-PW, GW with Graphite Shafts Inspired by R11 driver innovation, the new TaylorMade R11 Iron is tuned to perfection. Precision center-of-gravity (CG) placements, ultra-thin faces, a Tour sole design, and Inverted Cone Technology make R11 the most powerful, playable, and refined iron ever. With a weight port permanently positioned in the center of the back of an iron head during assembly, the Precision Weighting Port assures that each R11 iron in the set is of uniform swingweight while also ensuring that the CG location is precisely and optimally positioned in the center of the face between the toe and heel. In the past, clubmakers have installed cartridges of varying weight in the hosel to adjust swingweight, and by doing so have pulled the CG closer to the heel to varying degrees, resulting in a set of irons consistent in swingweight but inconsistent in CG location. The Inverted Cone Technology inside the R11 Irons promotes faster ball speed and distance on off-center hits, and the ultra-thin face thickness also promotes faster ball speed and distance in the R11 long- and middle-irons. The R11 irons Multi-Functional Sole is beveled at the back to make it perform like a much thinner sole, which increases playability from a variety of lies. Yet it also features a low and deeper center of gravity that makes it easy to launch the ball on a powerful and penetrating flight. Additional features: Ultra-thin face thickness promotes faster ball speed and distance Inverted Cone Technology promotes faster ball speed and distance on off-center hits Multi-functional sole increases playability from a variety of lies Progressive topline thickness promotes confidence at address throughout the set Progressive offset Advanced groove design promotes increased spin and control Iron construction: Cast Shaft types: Motore F1 55, Motore F1 65, Motore F1 75
TaylorMade R11 Iron Set - 4-PW, SW with Graphite Shafts Inspired by R11 driver innovation, the new TaylorMade R11 Iron is tuned to perfection. Precision center-of-gravity (CG) placements, ultra-thin faces, a Tour sole design, and Inverted Cone Technology make R11 the most powerful, playable, and refined iron ever. With a weight port permanently positioned in the center of the back of an iron head during assembly, the Precision Weighting Port assures that each R11 iron in the set is of uniform swingweight while also ensuring that the CG location is precisely and optimally positioned in the center of the face between the toe and heel. In the past, clubmakers have installed cartridges of varying weight in the hosel to adjust swingweight, and by doing so have pulled the CG closer to the heel to varying degrees, resulting in a set of irons consistent in swingweight but inconsistent in CG location. The Inverted Cone Technology inside the R11 Irons promotes faster ball speed and distance on off-center hits, and the ultra-thin face thickness also promotes faster ball speed and distance in the R11 long- and middle-irons. The R11 irons Multi-Functional Sole is beveled at the back to make it perform like a much thinner sole, which increases playability from a variety of lies. Yet it also features a low and deeper center of gravity that makes it easy to launch the ball on a powerful and penetrating flight. Additional features: Ultra-thin face thickness promotes faster ball speed and distance Inverted Cone Technology promotes faster ball speed and distance on off-center hits Multi-functional sole increases playability from a variety of lies Progressive topline thickness promotes confidence at address throughout the set Progressive offset Advanced groove design promotes increased spin and control Iron construction: Cast Shaft types: Motore F1 55, Motore F1 65, Motore F1 75
TaylorMade R11 Iron Set - 4-PW, SW with Steel Shafts Inspired by R11 driver innovation, the new TaylorMade R11 Iron is tuned to perfection. Precision center-of-gravity (CG) placements, ultra-thin faces, a Tour sole design, and Inverted Cone Technology make R11 the most powerful, playable, and refined iron ever. With a weight port permanently positioned in the center of the back of an iron head during assembly, the Precision Weighting Port assures that each R11 iron in the set is of uniform swingweight while also ensuring that the CG location is precisely and optimally positioned in the center of the face between the toe and heel. In the past, clubmakers have installed cartridges of varying weight in the hosel to adjust swingweight, and by doing so have pulled the CG closer to the heel to varying degrees, resulting in a set of irons consistent in swingweight but inconsistent in CG location. The Inverted Cone Technology inside the R11 Irons promotes faster ball speed and distance on off-center hits, and the ultra-thin face thickness also promotes faster ball speed and distance in the R11 long- and middle-irons. The R11 irons Multi-Functional Sole is beveled at the back to make it perform like a much thinner sole, which increases playability from a variety of lies. Yet it also features a low and deeper center of gravity that makes it easy to launch the ball on a powerful and penetrating flight. Additional features: Ultra-thin face thickness promotes faster ball speed and distance Inverted Cone Technology promotes faster ball speed and distance on off-center hits Multi-functional sole increases playability from a variety of lies Progressive topline thickness promotes confidence at address throughout the set Progressive offset Advanced groove design promotes increased spin and control Iron construction: Cast Shaft type: KBS Tour 90
TaylorMade Shaft Sleeves .350 with Flight Control Technology With TaylorMade Shaft Sleeves .350 with Flight Control Technology (FCT), you can increase or decrease the launch angle of the TaylorMade R11 Driver by 1 degree. Eight different FCT positions allow you to increase or decrease loft in 5 degree increments. With every FCT adjustment comes a change in face angle, as well as spin rate. The primary difference between the R9 and R11 sleeves is found in the identification labeling of the trajectory settings. With R9, the sleeve was labeled to provide guidance for selecting trajectories for left-to-right ball flight preferences. With R11, the sleeve now serves to function as a low-to-high ball flight preference, or simply known as loft selection. The two sleeves are exactly the same in terms of construction, material, and club head installation. The R9 sleeve can fit into the R11 head, and the R11 sleeve can fit into the R9 head. There is one other small difference and that is that we have a left-handed version of the R11 sleeve. The R9 sleeve did not require a left-handed version. Includes a shaft adaptor and ferrule.
TaylorMade R11 Driver (440cc) Right, 10.5 degree, Fujikura Blur 60 Graphite (Regular)
View DescriptionThe TaylorMade R11 Driver features the following: Adjust the loft with Flight Control Technology Adjust the face angle with the new Adjustable Sole Plate Adjust the CG location with Movable Weight Technology Up to 100 yards of side to side trajectory change and 1,000 RPM backspin change New aerodynamic shape promotes faster clubhead speed for more distance Non glare white crown and black clubface for easy alignment
The TaylorMade R11 Driver features the following: Adjust the loft with Flight Control Technology Adjust the face angle with the new Adjustable Sole Plate Adjust the CG location with Movable Weight Technology Up to 100 yards of side to side trajectory change and 1,000 RPM backspin change New aerodynamic shape promotes faster clubhead speed for more distance Non glare white crown and black clubface for easy alignment
The TaylorMade R11 Driver is finally here! The engineers at TaylorMade managed to identify and optimize the 3 elements of distance: Loft, Face Angle, and Flight Path (achieved through CG location). The absolute hottest driver on the market, it features TaylorMade's Flight Control Technology (FCT), Movable Weight Technology (MWT), and Adjustable Sole Plate Technology (ASP), allowing you to "tune in" the perfect club for your swing. Movable Weight Technology (MWT) lets you customize the weight throughout the head to customize the shape of your drive, be it a fade or a draw. Flight Control Technology (FCT) allows you to optimize the loft of the club, through an increase or decrease in launch angle. The Adjustable Sole Plate (ASP) dictates the face angle of the driver, with a choice of Open, Neutral, or Closed. Tour-ready 440cc clubhead shape gives you the advances of today's technology with a unique white matte finish. Tune in every aspect of your driver with the R11 and be the hero of the Tee Box!
TaylorMade R11 Driver...New Aerodynamic Shape! The R11 driver brings new technology, innovation, and aesthetics to its already successful line of TaylorMade drivers. With its distinctive white crown and black face, the R11 is one of the easiest drivers to align at address. Also, its unique technological features ensure the proper fit for every golfer, allowing you to maximize distance through proper loft, face angle, and flight path customization. TaylorMade Mens R11 Drivers feature: Lofts: 8 9 10.5 12 Graphite shaft available in Senior, Regular, Stiff or X-Stiff flex Available in left- and right-hand Includes MWT/FCT wrench for weight/angle adjustment Includes headcover Click Product Tour for more information Only R11 Can Activate The 3 Dimensions Of Distance!
The TaylorMade R11 Driver features the following: Adjust the loft with Flight Control Technology Adjust the face angle with the new Adjustable Sole Plate Adjust the CG location with Movable Weight Technology Up to 100 yards of side to side trajectory change and 1,000 RPM backspin change New aerodynamic shape promotes faster clubhead speed for more distance Non glare white crown and black clubface for easy alignment
